Hioki IM7580, Инструкция по эксплуатации

Страница: 217 / 340

209
Timing Chart
8.2.3 CONTINUOUS Measurement Mode
If a trigger signal input from EXT I/O or by touching on the screen in CONTINUOUS measurement
mode, the judgment results will be output from the signal lines of EXT I/O comparator result output
after measurement of all panel No.’s set to be executed on the screen.
The following are examples for the measurement timing.
In the timing example, the valid edge of the TRIG signal is set to falling (ON).
Example: Continuous measurement using panel No. 1, 2, and 4
Chuck
OFF OFF ON ON
ON
ON
Judgment result
ON OFF
Chuck Release
TRIG
― ― ― ―
(Measurement start signal)
EOM
―――
(Measurement complete signal)
INDEX
― ――― ―
(Analog measurement complete)
ERR
―――
(Error output)
Connection status
(Judgment result output)
Previous judgment
result
EOM:OFF From trigger to the end of measurement
INDEX:OFF Probe chuck period (Do not disengage the probe.)
Signal line Contents
INDEX,
― ――― ― ―
EOM
―――
For both INDEX and EOM, transition to HIGH is performed when the first panel measurement
starts after the trigger signal is input, and transition to LOW is performed after measurement of the
last panel is completed and the judgment result has been output. (HIGH level is maintained during
continuous measurement.)
AND
―――
LOW is output if the judgment results for all panels are IN.
8
External Control