Hioki IM7580, Инструкция по эксплуатации

Страница: 253 / 340

245
Saving Data to USB Flash Drive
How to understand CSV files
DATE (save time and date): ON, SET (measurement condition): ON, PARA (measurement parameter): ON,
DELIM (delimiter): “ , “ (comma), QUOTE: “ (double quotation mark)
“HIOKI E.E. CORPORATION”,”IM7580”,”Ver. 1.00”
“Serial No. 123456789”
“DATE”,”14-05-08”
“TIME”,”15:17:10”
“TRIG”,”EXT”
“TRIG DELAY”,”0.00000”,”s”
“SYNC”,”OFF”,””
“TRIG SYNC WAIT”,”0.00100”,”s”
“TRIG SYNC INDEX WAIT”,”0.00000”,”s”
“FREQ”,” 1.0000E+06”,”Hz”
“POWER”,”0.0”,”dBm”
“SPEED”,”MED”,””
“AVG”,”001”,””
“RDC”,”OFF”
“WAVE”,”0001”
“DC WAIT”,”0.00000”,”s”
“AC WAIT”,”0.00000”,”s”
“SCALING”,”OFF”
“Z[ohm]”,”OFF”,”PHASE[deg]”,”OFF”
“5.00”,””,”175.604”,””
Instrument information
Save date and time
Measurement conditions
Measurement parameters
Measured values
Header
”,”
Quotes
Delimiter
How to understand measured values
Examples: First parameter: Z (impedance (
Ω
)), second parameter: OFF,
third parameter: θ (impedance phase angle (°)) and fourth parameter: OFF
“5.00”,””,”175.604”,””
Measured value for the
first parameter
Measured value for the
third parameter
Measured value for the
second parameter
Measured value for the
fourth parameter
The above shows that the first parameter is “5.98718
Ω
”, the third parameter is “175.604°”.
Measured values for the second and fourth parameters are not displayed as they are OFF.
11
Using
USB
Flash
Drive