Hioki IM7580, Инструкция по эксплуатации

Страница: 107 / 340

99
Setting the Graph Display Method
When [MANUAL] is selected
• [UPPER-LOWER] : Sets the upper and lower limit values.
Use the numeric keypad to input numerical values and press [SET] .
Contents of setting Setting range
[UPPER]
(Upper limit value)
-9.9999 G to 9.9999 G ( [LINEAR] )
100.00 a to 9.9999 G (
[LOG]
)
[LOWER]
(Lower limit value)
-9.9999 G to 9.9999 G ( [LINEAR] )
100.00 a to 9.9999 G ( [LOG] )
[C] Repeats the input.
• [CENTER-DIV] : Sets the center value and width of the vertical axis.
(Disabled when [LOG] is selected in [SCALE] setting.)
Use the numeric keypad to input numerical values and press [SET] .
Contents of setting Setting range
[CENTER]
(Center value of
vertical axis)
-9.9999 G to 9.9999 G
[DIV]
(Width of vertical
axis)
-9.9999 G to 9.9999 G
* The setting range varies based on the value set in
[CENTER] .
When [AUTO] is selected
When [SCALE] is pressed on the measurement screen, the upper and lower limit values are
automatically calculated and displayed so that that the measurement results of parameters set in
[AUTO] are optimal.
When the trigger setting is [REPEAT], performs auto scaling after one sweep.
4
Analyzer Function