Hioki IM7580, Инструкция по эксплуатации

Страница: 207 / 340

199
External Input/Output Connector and Signals
Pin I/O
Signal name
Function Logic
Common AREA PEAK
15 OUT
PARA3-IN
― ――― ― ― ― ―
AREA judgment result of the third parameter
(Outputs if all the judgment results are IN.)
Neg Level
1 PARA4_IN
― ――― ― ― ― ―
PEAK judgment result of the fourth parameter
(Outputs if all the judgment results are IN.)
2 PARA1_LMIN_IN
― ――― ― ― ―― ― ― ― ― ―
PEAK judgment (local minimum value) result of
the first parameter
(Outputs if the judgment result is IN.)
3 PARA3_LMIN_IN
― ――― ― ― ―― ― ― ― ― ―
PEAK judgment (local minimum value) result of
the third parameter
(Outputs if the judgment result is IN.)
16 OUT
PARA4-HI
― ――― ― ― ― ―
AREA judgment result of the fourth parameter
(Outputs when any of the judgment is HI.)
Neg Level
1 - -
2 PARA2_LMIN_
― ――― ― ― ―― ― ― ―
MEASNG
―― ― ―――
PEAK judgment (local minimum value) result of
the second parameter
(Output if the vertical axis (measured value) is
out of range or if there is no comparison peak.)
3 PARA4_LMIN_
― ――― ― ― ―― ― ― ―
MEASNG
―― ― ―――
PEAK judgment (local minimum value) result of
the fourth parameter
(Output if the vertical axis (measured value) is
out of range or if there is no comparison peak.)
17 OUT
PARA4-LO
― ――― ― ― ― ―
AREA judgment result of the fourth parameter
(Outputs if any of the judgment is LO)
Neg Level
1 - -
2 PARA2_LMIN_
― ――― ― ― ―― ― ― ―
CONDNG
――――――
PEAK judgment (local minimum value) result of
the second parameter
(Output if the horizontal axis (sweep point) is out
of range or there is no comparison peak.)
3 PARA4_LMIN_
― ――― ― ― ―― ― ― ―
CONDNG
――――――
PEAK judgment (local minimum value) result of
the fourth parameter
(Output if the horizontal axis (sweep point) is out
of range or there is no comparison peak.)
18 OUT (Unused)
-
- -
19 OUT
CIRCUIT_
― ― ――― ― ― ―
NG
――
Equivalent circuit analysis comparator judgment
result output (output when logical AND of
judgment result is NG)
Neg Level
20 IN C_P0
― ― ― ―
*1 Switches the PEAK judgment result output.
- -
21 IN C_P1
― ― ― ―
*1 Switches the PEAK judgment result output.
- -
22 IN
LD0
― ― ―
Select panel No. (p. 203)
Neg Level
23 IN
LD2
― ― ―
Select panel No. (p. 203)
Neg Level
24 IN
LD4
― ― ―
Select panel No. (p. 203)
Neg Level
25 IN LD6
― ― ―
Select panel No. (p. 203)
Neg Level
26 IN LD_VALID
― ― ― ― ― ― ― ―
Execute panel load (p. 203) Neg Level
27 -
ISO_COM
― ―― ― ―――
Isolated power supply common
- -
28 OUT EOM
―――
Measurement complete
Neg Edge
29 OUT
INDEX
― ――― ―
Analog measurement complete
Neg Edge
30 OUT
PARA1-IN
― ――― ― ― ― ―
AREA judgment result of first parameter
(Outputs if all the judgment results are IN.)
Neg Level
1 PARA1_IN
― ――― ― ― ― ―
PEAK judgment result of the first parameter
(Outputs if all the judgment results are IN.)
2 PARA1_LMAX_
― ――― ― ― ――― ― ―
IN
― ―
PEAK judgment (local maximum value) result of
the first parameter
(Outputs if the judgment result is IN.)
3 PARA3_LMAX_
― ――― ― ― ――― ― ―
IN
― ―
PEAK judgment (local maximum value) result of
the third parameter
(Outputs if the judgment result is IN.)
8
External Control