manualshive.com logo in svg

Hioki DM7275 Series, Инструкция по эксплуатации

Поделиться
Скачать
Hioki DM7275 Series Скачать руководство пользователя страница 7

1

Introduction

Introduction

Thank you for purchasing the Hioki DM7275, DM7276 Precision DC Voltmeter. To obtain maximum 

performance from the instrument, please read this manual first, and keep it handy for future 

reference.

Model

Interface

DM7275

DM7276

LAN

USB

GP-IB

RS-232C

DM7275-01

DM7276-01

-

-

DM7275-02

DM7276-02

-

DM7275-03

DM7276-03

-

: Available, −: Not available

Registered trademarks

 • Microsoft, Windows 7 and Windows 8 are either registered trademarks or trademarks of Microsoft 

Corporation in the United States and other countries.

 • Teflon is a registered trademark of E. I. du Pont de Nemours and Company.

Notations

*

Additional information is presented below.

SET

(bold)

Names and keys on the screen are indicated with bold characters.

[ ]

Operation keys are indicate in 

[ ]

 square brackets.

Unless otherwise specified, “Windows” represents Windows 7 and Windows 8.

Accuracy

We define measurement tolerances in terms of f.s. (full scale), rdg. (reading) and dgt. (digit) values, 

with the following meanings: 

f.s.

(Maximum display)

The maximum displayable value.

rdg.

(Reading)

The value currently being measured and indicated on the measuring instrument.

dgt.

(Resolution)

The smallest displayable unit on a digital measuring instrument, i.e., the input value that 

causes the digital display to show a "1" as the least-significant digit.

See “Accuracy specifications” (p. 155).

10

9

8

7

6

5

4

3

2

1

Appx.

Ind.

www.

.com

[email protected]

1.800.561.8187

Содержание DM7275 Series
















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды