Hioki DM7275 Series Скачать руководство пользователя страница 175

Страница: 175 / 207

176

Error Displays

14.3 Error Displays

The following messages are displayed on the screen when the instrument malfunctions or

encounters an abnormal measurement state.

• If you feel that the instrument may be malfunctioning, contact your authorized Hioki distributor or

reseller after reviewing the information provided in “Q&A (Frequently Asked Questions)” (p. 168).

• When an error is displayed on the LCD screen and service is required, please contact your

authorized Hioki distributor or reseller.

Display

Description

Solution

+OvrRng/−OvrRng

Over-range

Select the appropriate range.

(p. 35)

NoCntct

Contact error

Check the connections with

the object to be measured.

(p. 31)

Or, adjust the threshold for the

contact check.(p. 71)

Err.TC

Temperature compensation

error

Connect a temperature sensor.

(p. 27)

ERR:001

Lower limit is higher than

Upper limit.

Cannot set because the lower

limit value is greater than the

upper limit value.

Set an upper limit value that

is greater than the lower limit

value.

(p. 51)

ERR:004

Unable to change the

setting during auto-hold.

When auto-hold function

is enabled, settings for

measurement speed and

continuous mode cannot be

changed.

Turn OFF the auto-hold

function. (p. 70)

ERR:005

Unable to set NULL

due to an abnormal

measurement value.

When

OverRng

NoCntact

, or

------

is displayed, NULL value

cannot be obtained.

Return from the abnormal

measurement state. (p. 46)

ERR:030

Command error.

Remote command syntax

error. (String is incorrect or

incorrect character code is

used.)

Check if the commands are

correct. (See the application

disc provided.)

ERR:031

Execution error. Invalid

parameter.

Remote command execution

error. The parameter value is

out of range.

Check if the parameters are

correct.

ERR:032

Execution error.

Remote command execution

error.

Check the execution error

conditions for each command.

ERR:050

The panel does not exist.

Panels that have not been

saved cannot be read.

Select a proper panel. (p. 61)

ERR:051

The panel does not exist.

Unable to rename.

Name of panels that have

not been saved cannot be

changed.

Select a panel that has been

saved. (p. 61)

ERR:060

Cannot use USB memory.

Set I/F function to USB-

MEMORY.

When

I/F

is set to

USB COM

USB flash drive cannot be

used.

Set the I/F to

USB MEMORY

(p. 115)

ERR:061

The drive is not ready.

(No USB memory

inserted)

USB flash drive is not inserted.

Insert a USB flash drive.

(p. 115)

ERR:062

This format is not

supported.

Format of the USB flash drive

is not correct.

Format the USB flash drive to

FAT32.

www.

.com

[email protected]

1.800.561.8187

Содержание DM7275 Series
















































































































































































































Результаты поиска

Содержание DM7275 Series

Отзывы:

Бренды по названию

Популярные бренды

Hioki DM7275 Series, Инструкция по эксплуатации

Результаты поиска

Содержание DM7275 Series

Отзывы:

Бренды по названию

Популярные бренды