manualshive.com logo in svg

Hioki DM7275 Series, Инструкция по эксплуатации

Поделиться
Скачать
Hioki DM7275 Series Скачать руководство пользователя страница 108

106

Preparing to Use an Interface (Connection and Settings)

Settings

IP Address 

This address is used to recognize individual devices that are connected to a 

network. Use an address that is not already in use by another device.

Subnet Mask

This setting is used to divide the IP address into an address that indicates the 

network and an address that indicates the device. Use the same subnet mask 

setting as other devices on the same network.

Default Gateway

When connecting the instrument to a network

When the computer being used (or the device you are using to communicate with 

the instrument) is on a different network than the network to which the instrument 

is connected, specify a device to serve as the gateway by setting its IP address.

If the instrument is on the same network as the computer, you should generally 

use the same default gateway setting as the computer.

When connecting the instrument to a single computer or when not using a 

gateway

Set the IP address to 

0.0.0.0

.

Port

Specify the TCP/IP port number to use for communications command connections. 

www.

.com

[email protected]

1.800.561.8187

Содержание DM7275 Series
















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды