manualshive.com logo in svg

Hioki DM7275 Series, Инструкция по эксплуатации

Поделиться
Скачать
Hioki DM7275 Series Скачать руководство пользователя страница 36

31

3

Measurement

3.1  Connecting the Measurement Cables 

(Measurement Target)

Before connecting the measurement cables to the measurement target, read “Before connecting a 

measurement cable” (p. 9) and “Before starting a measurement” (p. 10) carefully. 

Use Hioki’s optional test leads, contact pins, alligator clips, or other connectors as appropriate 

depending on the measurement target. 

For more information: “Options (Sold Separately)” (p. 3)

Using the L9207-10 Test Lead

(1) 

About the L9207-10

4

Black

Red

5

1

3

2

The test lead plugs are fitted 

with protective caps. Remove 

the caps before use.

Protective cap

1

Metal pins

Connect the metal pins to the 

measurement target. 

With cap: 4 mm or less

Without cap: 19 mm or less

Thickness: Approx. 2 mm

2

Caps

Fit the caps to the metal pins to prevent 

short-circuits. The test leads can also be 

used with the caps removed. 

3

Barriers

The barriers indicate the safe distance 

from the metal pins. 

During measurement, do not touch 

the area in front of the barriers.

4

Plugs

Connect the plugs to the instrument’s 

measurement terminals.

5

Cables

The cables have a double-insulated 

design.

(Length: Approx. 900 mm; thickness: 

approx. 3.6 mm)

If the white portion of the inside of 

the cable is exposed, replace the 

test leads with a new L9207-10 set.

Remove the caps when using the test leads with the L4933 Contact Pin Set or the L4934 Small 

Alligator Clip Set. 

Removing the caps

Fitting the caps

Gripping the base of the cap gently, pull 

to remove.

Store caps after removal so as not to lose 

them.

Pass the test lead metal pin through the 

hole in the cap and insert firmly all the 

way.

3  Measurement

3

Measurement

www.

.com

[email protected]

1.800.561.8187

Содержание DM7275 Series
















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды