manualshive.com logo in svg

Hioki DM7275 Series, Инструкция по эксплуатации

Поделиться
Скачать
Hioki DM7275 Series Скачать руководство пользователя страница 176

177

Error Displays

Display

Description

Solution

ERR:063

Error while reading the 

USB memory.

An error occurred while 

reading the USB flash drive.

The file may be damaged. 

Recover the file or use a 

different USB flash drive.

ERR:064

Error while reading the 

configuration file.

An error occurred while 

reading a setting file in the 

USB flash drive.

The file may be damaged. 

Recover the file or use a 

different USB flash drive.

ERR:065

File not found.

A valid file was not found in the 

USB flash drive.

Specify a proper file.

ERR:070

No space available.

There is no free space in the 

USB flash drive.

Delete unnecessary files to 

secure free space.

ERR:071

Error occurred saving 

the file.

An error occurred while saving 

data in the USB flash drive.

The file may be damaged. 

Recover the file or use a 

different USB flash drive.

ERR:076

Error occurred deleting 

the file.

An error occurred while 

deleting data in the USB flash 

drive.

The file may be damaged. 

Recover the file or use a 

different USB flash drive.

ERR:077

Unable to rename the file 

because another file with 

the same name already 

exists.

The file name cannot be 

changed as there are files with 

the same file name.

Specify a different file name.

ERR:078

Error occurred renaming 

the file.

An error occurred while 

changing a file name in the 

USB flash drive.

The file may be damaged. 

Recover the file or use a 

different USB flash drive.

ERR:079

Error while reading the 

USB memory.

An error occurred while 

reading the USB flash drive.

The file may be damaged. 

Recover the file or use a 

different USB flash drive.

ERR:080

Unable to enter the 

adjustment mode.

The mode cannot be changed 

to adjustment mode.

The Adjustment screen is not 

available for use by end-users.

ERR:090

ROM check sum error.

Check sum of the program 

ROM does not match.

Malfunction of the instrument. 

Request service.

ERR:091

RAM error.

The RAM failed.

Malfunction of the instrument. 

Request service.

ERR:092

Memory access error. 

Turn off the power and 

restart after a while.

Communication with memory 

failed.

Turn OFF the power and turn it 

ON again after some time.

ERR:093

Memory test error.

Memory failure.

Malfunction of the instrument. 

Request service.

ERR:094

Adjustment data error.

Adjustment data is not correct. Malfunction of the instrument. 

Request service.

ERR:095

Backup data error.

Backup data is not correct.

Settings have been reset. 

Reconfigure measurement 

conditions and other settings.

ERR:096

Failed to detect line 

frequency. Select line 

frequency.

The power frequency has not 

been detected.

Check the voltage and 

frequency of the power supply.

(p. 90)

ERR:098

"The clock is not set.

 

Reset? (15-01-01 

00:00:00)"

Clock has not been set.

Replace the backup battery 

and set a clock.

ERR:099

Failed to detect line 

frequency; will be set to 

50 Hz.

The power frequency has not 

been detected. The frequency 

will be set to 50 Hz.

Check the voltage and 

frequency of the power supply.

(p. 90)

Maintenance and Service

14

www.

.com

[email protected]

1.800.561.8187

Содержание DM7275 Series
















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды