Hioki DM7275 Series Скачать руководство пользователя страница 28

Страница: 28 / 207

Preparing for Measurement

2.1 Preparation Process

Before starting, read “Operating Precautions” (p. 7) carefully.
For more information about rack mounting, see “Appx. 7 Rack Mounting” (p. Appx.14).

(1) Position the instrument as desired.

(p. 7)

(2) Perform the pre-measurement inspection.

(p. 24)

(3) Connect the power cord.

(p. 25)

(4)

Connect the measurement cables to the measurement terminals.

(p. 26)

(5)

Connect the temperature sensor to the TEMP.SENSOR connector.

(When performing temperature measurement or using the temperature compensation function)

(p. 27)

(6) Configure and connect the external interface (as necessary).

• Using the USB interface. (p. 98)

• Using the RS-232C interface. (p. 100)

• Using the GP-IB interface. (p. 102)

• Using the LAN interface. (p. 104)

• Using a USB flash drive

(p. 115)

• Using the EXT I/O connector (p. 125)

(7)

Turn on the instrument.

(p. 28)

(8)

Set the time and date.

(p. 30)

2 Preparing for Measurement

Power cord

To outlet

Preparing for Measurement

www.

.com

[email protected]

1.800.561.8187

Содержание DM7275 Series
















































































































































































































Результаты поиска

Содержание DM7275 Series

Отзывы:

Бренды по названию

Популярные бренды

Hioki DM7275 Series, Инструкция по эксплуатации

Результаты поиска

Содержание DM7275 Series

Отзывы:

Бренды по названию

Популярные бренды