Hioki 8860-50, Инструкция по эксплуатации

Страница: 147 / 490

135
6
Chapte
r 6
T
rigger Setting
s
Trigger Settings
Chapter 6
Open the Settings screen
Menu selection
Page selection
1
2
Make trigger settings on the Trigger Settings screen. You can also make them on the Waveform screen
(p. 167). Setting choices are function-dependent.
About screen contents:
"2.5.3 Trigger Settings Screen" (p. 35)
3
Trigger Settings
• Trigger mode setting (p. 138)
• Combining logic (AND/OR) for multiple trigger
sources (p. 139)
• Pre-trigger settings (p. 140)
(Memory function, FFT function, REC&MEM
function)
• Trigger timing settings (p. 144)
• Trigger source settings
Timer Trigger Settings (p. 162)
• Setting recording start and stop times
• Setting a recording interval
Analog Trigger Settings*
1
(p. 146)
[Analog] page
• Level trigger(p. 150)
• Window trigger (In-Window trigger, Out-of-Window
trigger) (p. 152)
• Period trigger (In-Period, Out-of-Period)(p. 153)
• Glitch trigger*
2
(p. 155)
• Slope trigger*
2
(p. 156)
• Voltage sag trigger*
2
(p. 158)
• Trigger filter*
3
• Event count*
4
*1. Setting choices depend on the type of analog triggering.
*2. Memory function and FFT function only
*3. Can be set for each analog trigger selection
(except for Slope and Glitch triggers).
*4. [Expanded] setting only
Logic Trigger Settings (p. 159)
[Logic] page
• Setting combining logic for logic triggers
• Trigger filter settings
• Trigger pattern settings
Manual Trigger Settings (p. 165)
External Trigger Settings (p. 166)
• External control terminal connections and
settings (p. 375)
Trigger Source
Trigger Output (p. 380) Trigger Search (p. 223)