Hioki 8860-50 Скачать руководство пользователя

Страница: 255 / 490

9.3 Pre-Measurement Settings

243

Chapter 9

Mea

suring with Real-T

ime Savi

Operating Key

Procedure

SHEET/PAGE

Select the

[Basic]

page.

Specify the save destination.

CURSOR

Move the cursor to the

[Save in]

item.

Select

[Edit]

The [Browse Folders] dialog box appears.

CURSOR

Move the cursor to the save destination of the
storage media.

Select

[OK].

The dialog box closes.

Set the save name (if you want to change the name).

CURSOR

Move the cursor to the

[Name]

item.

F1 to F8

Enter the save name.(default setting: REAL)

See

"Entering Text and Comments" (p. 66)

Select the contents (Name Pattern) to be automatically
added to the save name

CURSOR

Move the cursor to the

[Name Pattern]

item.

F1 to F8

Select the contents to be automatically added to
the save name

Set the timebase [Sampling] of the measurement wave-
form.

CURSOR

Move the cursor to the

[Timebase]

item.

F1 to F8

(Switch Display: F8)

Set the time per division (timebase) on the
horizontal axis for recording the measure-
ment waveform.

The (linked) sampling rate is changed according-
ly. (The sampling rate can also be set directly.)

Select the storage media:



CURSOR

Open the layer below:



CURSOR

Numbering

Appends serial numbers beginning
with 0001 as a suffix to the save name.

Trig (suffix)

Appends the trigger date and time as a
suffix to the save name.

Trig (prefix)

Appends the trigger date and time as a
prefix to the save name (default set-
ting).

100, 200, 500



s/div,

1, 2, 5, 10, 20, 50, 100, 200, 500 ms/div
1, 2, 5, 10, 30, 50, 100 s/div
1, 2, 5 min/div

Setting Recording Conditions

To open the screen: Select

with the

SUB MENU

keys



Status Settings screen

Available space on save destination
storage media

Measurement is disabled if the available
space at the save destination is less than
3 MB.

Saved files

A folder is created with the save name,
and each file is saved in this folder. If a
folder with the same name already exists,
a four-digit serial number is appended to
the save name (for example,
REAL_0001).

See: "File/Folder Organization for Real-

Time Saving" (p. 247)

For an example of file names created by
the [Name Pattern] setting: (p. 271)

When saving to a shared folder on a
computer

See: "11.1.4 Using a Network Shared

Folder" (p. 264)

The available timebase settings may be
limited by the save destination and the
number of channels used (p. 247)

When the timebase is 100



s/div or 200



s/div

The waveform is not displayed while mea-
suring.

The available space on the selected stor-
age media is displayed by selecting the
[Update] button at the bottom of the
screen.

Содержание 8860-50











































































































































































































































































































































































































































































































Результаты поиска

Содержание 8860-50

Отзывы:

Похожие инструкции для 8860-50

Бренды по названию

Популярные бренды

Hioki 8860-50, Инструкция по эксплуатации

Результаты поиска

Содержание 8860-50

Отзывы:

Похожие инструкции для 8860-50

Бренды по названию

Популярные бренды