Hioki 8860-50, Инструкция по эксплуатации

Страница: 121 / 490

4.3 Acquiring Waveforms Using the Utility Functions
109
4
Chapte
r 4
Me
asuremen
t Co
nfiguration Sett
ings
Waveforms can be recorded into individual blocks by dividing memory space into
multiple blocks. You can record waveforms beginning at any block (Start Block),
choose which blocks to display (Display Block), or display multiple overlaid
blocks (Reference Block).
The maximum number of blocks for memory division depends on the installed
memory board and recording length (up to 4096 divisions, for REC&MEM up to
1024 divisions).
In addition, triggered waveform data can be acquired continuously and recorded
sequentially in specified blocks (at the Start Block, for the specified Used
Blocks). Dead time while displaying or printing (during which triggers are
ignored) can be minimized.
Even if the Memory Division function is not used, up to 16 blocks of data
(depending on the specified recording length) can be saved to each block, so
that previously recorded data can be selected for display on the Waveform
Screen.
See "8.11 Viewing Past Waveforms" (p. 219)
4.3.4 Dividing Memory
1
Open the Settings screen
2
Menu selection
Settings are made on the Memory Division Settings screen. Blocks to be displayed can also be selected on
the Waveform screen (p. 220).
This applies to the Memory function and REC&MEM function only.
About screen contents:
"2.5.5 Memory Division Settings Screen" (p. 37)
Normal
Memory Division
1 2 3 4 5 6
Reference Block
Display Block
The Reference Block can be displayed as an
overlay.
Dead time (not recorded)
Recording length
Recording length
Blocks
When the number of Used Blocks = 5
Start Block
When saving manually, select whether to save all used blocks,
or just the displayed block. (p. 285)
1 2 3 4 5
When batch saving, an index
file (SEQ) is created. When
reloading this file, all saved
blocks can be read at once.
Auto Save
Auto Print
Used Blocks