manualshive.com logo in svg

Hioki 8860-50, Инструкция по эксплуатации

Поделиться
Скачать
Hioki 8860-50 Скачать руководство пользователя страница 379

13.3  Making System Settings

367

13

Chapter 13

  System 

Env

ironment Sett

ings

The following self-test checks are available.

13.3.4 Self-Test (Self Diagnostics)

Check the instrument's internal memory (ROM and RAM)(p. 367). 
The results are displayed on the screen.

Check the screen display (color check, gradation check, character check) (p.
368).

Check whether instrument keys are functioning correctly (p. 369).

Check printing by the printer and clean print heads (p. 370).

Check LAN settings and status. Also check whether it is possible to commu-
nicate with other devices (p. 371).

Check media status (p. 372).

ROM/RAM Check

To open the screen: 

Press the 

DISP 

key



Press the 

F7 

[System]

 key



Select 

 with the 

SUB MENU 

keys 

Init Settings screen

See

Screen Layout (p. 51)

Operating Key

Procedure

CURSOR

Move the cursor to the 

[ROM/RAM Check]

 but-

ton.
Select

 

[Execute].

The [ROM/RAM Check] dialog appears.
The ROM/RAM check starts.
(The storage RAM check may require more than
an hour if additional memory has been installed.)

Do not turn the power off during the check.

To cancel the check

Select

 

F1 

[Abort].

All operation key (except F1) are disabled during
execution of the check.

The judgment results appear when the check fin-
ishes.

OK

: Normal

NG

: Error ("If "NG" appears" (p. 368))

To close the dialog

Select

 

the 

[Close]

 button.

F1

To perform the every time the instrument is powered on

CURSOR
F2

Move the cursor to 

[Check at the time of Power

on.] 

and select

 [On]

.

(The contents of RAM are not lost when a ROM/
RAM check is performed.)

NG report

Displays the content of the
error for an NG check
item.

Result

Содержание 8860-50











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды