Hioki 8860-50, Инструкция по эксплуатации

Страница: 328 / 490

12.2 Print Methods and Print Items
316
Available Printing types
The following printing types are available.
Use the Print Settings screen ([Printer] page of the [Print] menu) to select the content to print.
Type
(Print Example)
Content
Auto Print
(p. 317)
Manual
Print
(p. 319)
Print
Examples
Functions
Whole Wave *
1
(Whole Waveform)
Print the entire range of data ac-
quired by the instrument.
O
*3
O (p. 339)
O O O O O
A-B Wave *
1
A-B Waveform
From the data acquired by the in-
strument, print the data between
the A and B cursors.

*
2
O
(p. 344)
O O O

O
Trig Wave *
1
(Pre- and Post-
Trigger Wave-
forms)
Print 10 divisions of the data be-
fore and after a trigger event.

O
(p. 345)
O O O
 
Report
Prints the waveform data of the
displayed area on the waveform
screen, upper and lower limits
and analog channel settings.

O
(p. 345)
O O O O O
List
Print a list of settings made in the
settings screens. 
O
(p. 346)
O O O O O
Calc Results
Calculation results
Print numerical calculation re-
sults.
Calculation settings are neces-
sary.
See Analysis and
Communication
Supplement
O O
(p. 347)
O
   
Screen Image
Print the currently displayed
screen.

O
(p. 347)
O O O O O
(Screen Link)
Print the appropriate type of data
for the display screen. (Print a
waveform when a waveform is
displayed, and print a list when
something other than a waveform
is displayed.)

O O O O O O
Event
The contents of all currently set
event marks are printed.

O
(p. 348)
O O O

O
*1. Waveforms or numerical values can be printed (Default setting: Waveform).
See "Recording Type Settings" (p. 327), Numerical Data Printing Examples
(p. 343)
Waveforms can be printed with the addition of settings data, comments, gauges, and so on.
See "12.6.5 Printing Comments and Setting Data" (p. 337)
*2. With the Memory Function, printing is possible only when Roll Mode is disabled [Off]. First acquire the
data, then specify a range with the A and B cursors and set the print area to [A-B] .
See "Print Area Settings" (p. 328)
*3: Cannot be executed with the Real-Time Saving function enabled.