Hioki 8860-50, Инструкция по эксплуатации

Страница: 220 / 490

8.8 Cursor Values
208
Operating Key Procedure
6
(Only when using the Timebase 2 with the Memory function)
Select the axis to serve as the origin of cursor move-
ment.
CURSOR
F1 to F8 Move the cursor to the [Axis] item.
Select either choice.
(with the REC&MEM function)
Select to display cursors on the Memory or Recorder
waveform.
CURSOR
F1 to F8 Move the cursor to the [Region] item.
Select either choice.
7
Select the channels for which to display cursor values.
CURSOR
F1 to F8 Move the cursor to the [Cur A] or [Cur B] item.
Select channel(s) for display.
8
Move the A/B cursors and read the cursor values.
A/B knobs Turn (inner) Knob A and (outer) Knob B to move
the A/B cursors.
Timebase 1 or Timebase 2
REC Displays cursors on the Recorder waveform
MEM
Displays cursors on the Memory waveform
All, or channel numbers for which to display cur-
sor values
"About Cursor Values" (p. 203)
Time Values
Measurement
Values
If cursors are not visible on-screen even when enabled by the A/B Cursor
settings
Cursor measurements are available even when the A or B cursor of off-screen.
Turn Knob A or B as needed to move each cursor on-screen.
To view the waveform before or after the A/B cursors when off the screen
When using the A/B cursors, the waveform at an off-screen cursor location can
be displayed using the Jump function.
See "8.3 Specifying a Display Location (Jump Function)" (p. 195)
When specifying channels on which you choose to display cursor values
(Cur A and Cur B)
Even when cursors A and B are each assigned to different channels, the potential
difference between A and B can be obtained.