HYBRID/TROUBLE SHOOTING
3–763
CHECKLIST: P0BEE (TCB6)
P0BEE (TCB6)
Abnormality in W-phase current sensor
characteristics
Inspection Procedure
Step
Action
Description
Judgement
Check
(Yes/No)
Yes
No
1
Reproduction
check [HINO-
DX]
1. Set the starter key to the
"LOCK" position.
2. Connect the diagnosis tool
(HINO-DX) to the vehicle.
3. Set the starter key to the "ON"
position.
4. Clear the malfunction history.
5. Perform a test run. (accelerate
and decelerate running for
approximately 1 hour).
6. Set the starter key to the "ON"
position.
7. In [Fault Information] on the
diagnosis tool screen, check if
P0BEE-B6 is detected.
DTC P0BEE-
B6 is detected:
Go to YES.
DTC P0BEE-
B6 is not
detected: Go
to NO.
Replace the
inverter.
The inspec-
tion is com-
pleted.
(Temporary
actuation of
protection
function due to
external noise)
