HYBRID/TROUBLE SHOOTING
3–67
INSPECTION PROCEDURE: P060B (TCB2)
1.
Set the starter key to the "LOCK" position.
2.
Connect the diagnosis tool (HINO-DX) to the vehicle.
3.
Set the starter key to the "ON" position.
4.
Clear the malfunction history.
5.
Start the engine and keep it idling for 1 minute.
6.
In [Fault Information] on the diagnosis tool screen, check if P060B-
B2 is detected.
NO
YES
1
Reproduction check [HINO-DX]
SHTS03ZZZ0300049
Is DTC P060B-B2 detected?
Replace the HV ECU.
The inspection is completed. (The abnormal-
ity may have been caused by a temporary
factor such as noise.)
