HEIDENHAIN TNC 620, Руководство пользователя

Страница: 416 / 521

HEROS functions | Ethernet interface
10
DHCP server
tab
The machine manufacturer can use the
DHCP server
tab in the
control to configure a DHCP server in the machine network. Using
this server, the control can establish connections with other network
components of the machine network, e.g. with industrial computers.
Refer to your machine manual.
Ping/Routing
tab
You can check the network connection on the
Ping/Routing
tab.
The
Ping/Routing
tab contains the following information and
settings:
Domain Information or Setting
Ping Address:Port
and
Address:
You can enter the IP address of the computer and
possibly the port number for checking the network
connection.
Entry: Four numerical values separated by dots,
possibly a port number separated by a colon e.g.
10.7.113.10:22
As an alternative, you can enter the name of the
computer whose connection you want to check.
Starting and stopping the test
Start
button: starts the test
The control displays status information in the
ping field.
Stop
button: stops the test
Routing
The control displays status information of the
operating system about the current routing for
network administrators.
SMB share tab
The
SMB share
tab is included only in connection with a VBox
programming station.
When the check box is active, the control releases areas or partitions
protected by a code number for the Explorer of the Windows PC
used, e.g.
PLC
. You can activate or deactivate the check box only by
using the machine manufacturer code number.
In the
TNC VBox Control Panel
, select a drive letter within the
NC
share
tab for displaying the selected partition and then connect
the drive with
Connect
. The host displays the partitions of the
programming station.
Further information: Programming station for milling
controls
You download the documentation together with the
programming station software.
416
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022