HEIDENHAIN TNC 620, Руководство пользователя

Страница: 263 / 521

Testing and running | Exporting a finished part
6.8 Exporting a finished part
Application
In
Test Run
operating mode, the
EXPORT WORKPIECE
soft key
allows you to export the current status of the motion simulation as a
3D model in STL format.
The file size depends on the complexity of the geometry.
You can use the exported STL files as a workpiece blank
in the NC program of a subsequent machining step, for
example.
Further information: User's Manual for Klartext
Programming or ISO Programming
To export a 3-D model, proceed as follows:
Set the motion simulation to the desired status
Press the
EXPORT WORKPIECE
soft key
The control opens a pop-up window.
Enter the desired file name
Select the desired target directory
Confirm the data entered
6
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
263