HEIDENHAIN TNC 620, Руководство пользователя

Страница: 52 / 521

First steps | Workpiece setup
2
2.5 Workpiece setup
Selecting the correct operating mode
Workpieces are set up in the
Manual operation
or
Electronic
handwheel
operating mode
Press the operating mode key
The control switches to the
Manual operation
mode.
Further information on this topic
The
Manual operation
mode
Further information: "Moving the machine axes", Page 171
Clamping the workpiece
Mount the workpiece with a fixture on the machine table. If you have
a 3-D touch probe on your machine, then you do not need to clamp
the workpiece parallel to the axes.
If you do not have a 3-D touch probe available, you have to align the
workpiece so that it is fixed with its edges parallel to the machine
axes.
Further information on this topic
Presetting with a 3-D touch probe
Further information: "Presetting with a 3-D touch probe (option
number 17)", Page 230
Presetting without 3-D touch probe
Further information: "Presetting without a 3D touch probe",
Page 201
Presetting with a 3-D touch probe
(option number 17)
Inserting a 3-D touch probe
Select the
Positioning w/ Manual Data Input
operating mode
Press the
TOOL CALL
key
Enter the tool data
Press the
ENT
key
Enter the tool axis
Z
Press the
ENT
key
Press the
END
key
Press the
NC Start
key
52
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022