HEIDENHAIN TNC 620, Руководство пользователя

Страница: 33 / 521

Basic information | Control model, software and features
Opt. contour milling (option 167)
Optimized contour cycles
Cycles for machining any pockets and islands using trochoidal milling
Further options available
HEIDENHAIN offers further hardware enhancements
and software options that can be configured and
implemented only by your machine tool builder.This
includes functional safety (FS), for example.
For more information, please refer to your machine tool
builder's documentation or the HEIDENHAIN brochure
titled Options and Accessories .
ID: 827222-xx
Feature Content Level (upgrade functions)
Along with software options, significant further improvements of the
control software are managed via the F eature C ontent L evel upgrade
functions. If you install a software update on your control you do not
automatically have the functions available as covered by the FCL.
All upgrade functions are available to you without
surcharge when you receive a new machine.
Upgrade functions are identified in the manual as
FCL n
. The
n
signifies the serial number of the development status.
You can purchase a code number in order to permanently enable
the FCL functions. For more information, contact your machine tool
builder or HEIDENHAIN.
Intended place of operation
The control complies with the limits for a Class A device in
accordance with the specifications in EN 55022, and is intended for
use primarily in industrially-zoned areas.
Legal information
The control software contains open-source software that is subject
to special terms of use. These special terms of use have priority.
To call further information on the control:
Press the
MOD
key
Select the
General information
group in the MOD menu
Select the
License information
MOD function
Furthermore, the control software contains binary libraries of the
OPC UA
software from Softing Industrial Automation GmbH. For
these libraries, the terms of use agreed upon between HEIDENHAIN
and Softing Industrial Automation GmbH shall additionally apply and
prevail.
When using the OPC UA NC server or DNC server, you can influence
the behavior of the control. Therefore, before using these interfaces
for productive purposes, verify that the control can still be operated
without malfunctions or drops in performance. The manufacturer
of the software that uses these communication interfaces is
responsible for performing system tests.
1
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
33