HEIDENHAIN TNC 620, Руководство пользователя

Страница: 363 / 521

MOD functions | Configuring the HR 550FS radio handwheel
Setting the transmission channel
If the wireless handwheel is started automatically, then the control
tries to select the transmission channel that provides the best
transmission signal.
To manually set the radio channel, proceed as follows:
Select the
Machine settings
group in the MOD menu
Press the
SET UP WIRELESS HANDWHEEL
soft key
The control opens a pop-up window.
Select the
Frequency spectrum
tab
Select the
Stop HW
button
The control stops the connection to the wireless handwheel and
determines the current frequency spectrum for all 16 available
channels.
Note the number of the channel with the least amount of radio
traffic (smallest bar)
Select the
Start handwheel
button
The control restores the connection to the wireless handwheel.
Select the
Properties
tab
Select the
Select channel
button
The controls shows all available channel numbers
Select the number of the channel with the least amount of radio
traffic
Select the
END
button
The control saves the configuration.
Selecting the transmitter power
A reduction in transmission power decreases the range
of the wireless handwheel.
To set the transmitter power of the handwheel, proceed as follows:
Select the
Machine settings
group in the MOD menu
Press the
SET UP WIRELESS HANDWHEEL
soft key
The control opens a pop-up window.
Select the
Set power
button
The control displays the three available power settings.
Select the desired transmitter power setting
Select the
END
button
The control saves the configuration.
9
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
363