HEIDENHAIN TNC 620, Руководство пользователя

Страница: 88 / 521

Fundamentals | File management
3
Choosing one of the last files selected
Call the file manager: Press the
PGM MGT
key.
Display the last ten files selected: Press the
LAST FILES
soft key
Press the arrow keys to move the cursor to the file you wish to
select:
Moves the cursor up and down within a window
Select the file: Press the
OK
soft key, or
Press the
ENT
key
The
COPY FIELD
soft key allows you to copy the path of
a marked file. You can reuse the copied path later (e.g.,
when calling a program with the
PGM CALL
key).
USB devices on the control
Use the USB port only for file transfer and backup. Before
editing or running an NC program, save it to the hard
disk of the control. This helps to avoid duplicate data
maintenance and prevents potential problems resulting
from data transfer during program run.
Backing up data from or loading onto the control is especially easy
with USB devices. The control supports the following USB block
devices:
Floppy disk drives with FAT/VFAT file system
Memory sticks with the FAT/VFAT or exFAT file system
USB sticks with NTFS file system
Hard disks with the FAT/VFAT file system
CD-ROM drives with the Joliet (ISO 9660) file system
The control automatically detects these USB devices when they are
plugged in. If the file system is not supported, the control issues an
error message as soon as the stick is plugged in.
88
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022