HEIDENHAIN TNC 620, Руководство пользователя

Страница: 355 / 521

MOD functions | Changing the machine settings
Computer-specific access control
If your machine tool builder has set up computer-specific access
control (machine parameter
CfgAccessControl
no. 123400), you can
permit access for up to 32 connections authorized by you.
To create a new connection:
Press the
ADD NEW
soft key
The control opens an input window for you to enter the
connection data.
Access settings
Host name Host name of the external
computer
Host IP Network address of the exter-
nal computer
Description Additional information
The text is shown in the
overview list.
Type:
Ethernet
Com 1
COM 2 Network connection
Serial interface 1
Serial interface 2
Access rights:
Inquire For external access, the control
opens a query dialog
Deny Do not permit network access
Permit Permit network access without
query
When user administration is active, you can set up
only secure network connections via SSH. The control
automatically disables the LSV2 connections via the
serial interfaces (COM1 and COM2) and the network
connections without user identification.
If you assign the
Inquire
access right to a connection, and if
access is gained from this address, then the control opens a pop-up
window.
You must decide if you permit or deny external access in the dialog:
External access Permission
Yes Permit once
Always Permit continuously
Never Deny continuously
No Deny once
9
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
355