HEIDENHAIN TNC 620, Руководство пользователя

Страница: 214 / 521

Setup | Using a 3-D touch probe (option 17)
5
Writing measured values from the touch probe cycles to
the preset table
If you want to save measured values in the basic
coordinate system, use the
ENTRY IN PRESET TABLE
function. If you want to save measured values
in the workpiece coordinate system, use the
ENTER IN DATUM TABLE
function.
Further information: "Writing measured values from the
touch probe cycles to a datum table", Page 213
With the
ENTRY IN PRESET TABLE
soft key, the control can write the
values measured during any touch probe cycle to the preset table.
The measured values are then stored with reference to the machine
coordinate system (REF coordinates). The preset table has the name
PRESET.PR, and is saved in the TNC:\table\ directory.
Select any probe function
Enter the desired coordinates for the preset in the designated
input boxes (depends on the touch probe cycle being run)
Enter the preset number in the
Number in table?
input field
Press the
ENTRY IN PRESET TABLE
soft key
The control opens the
Overwrite active preset?
menu.
Press the
OVERWRITE PRESET
soft key
The control saves the preset in the preset table under the entered
number.
Preset number does not exist: The control does not save the
line until the
CREATE LINE
soft key has been pressed (Create
line in table?)
Preset number is protected: Press the
ENTRY IN LOCKED LINE
soft key to overwrite the active preset
Preset number is password-protected: Press the
ENTRY IN
LOCKED LINE
soft key and enter the password to overwrite
the active preset
The control displays a note if a table row cannot be
written to because of disabling. The probing function
itself is not interrupted.
214
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022