HEIDENHAIN TNC 620, Руководство пользователя

Страница: 50 / 521

First steps | Setting up tools
2
Editing the TOOL.T tool table
Refer to your machine manual.
The procedure for calling the tool management may
differ from that described below.
In the TOOL.T tool table (permanently stored under
TNC:\table\
),
you can save tool data such as length and radius, as well as further
tool-specific information that the control needs in order to execute a
wide variety of functions.
To enter tool data in the tool table TOOL.T, proceed as follows:
Press the
TOOL TABLE
soft key
The control shows the tool table.
Set the
EDIT
soft key to
ON
With the upward or downward arrow keys you can
select the tool number that you want to edit
With the rightward or leftward arrow keys you can
select the tool data that you want to edit
Press the
END
key
The control closes the tool table and saves the
changes.
Further information on this topic
Operating modes of the control
Further information: "Modes of operation", Page 65
Working with the tool table
Further information: "Entering tool data into the table",
Page 135
Working with tool management
Further information: "Calling tool management", Page 151
50
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022