HEIDENHAIN TNC 620, Руководство пользователя

Страница: 346 / 521

MOD functions | Selecting the position display
9
Display Function
REFDST Distance remaining to the programmed position in the machine coordinate system;
difference between actual and target positions
Examples with Cycle
11
:
Scaling factor 0.2
L IX+10
The REFDST display shows 2 mm.
The scaling factor has an effect on the distance and thus on the display.
Examples with Cycle
11
and tilted working plane:
Tilt A by 45°
Scaling factor 0.2
L IX+10
The REFDST display shows 1.4 mm in the X and Z axes.
The scaling factor and the tilt have an effect on the distance and thus on the display.
M118 Traverse paths that were executed with handwheel superimpositioning function (
M118
)
With the
Position display 1
MOD function, you can select the
position display in the status display.
With the
Position display 2
MOD function, you can select the
position display in the additional status display.
346
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022