HEIDENHAIN TNC 620, Руководство пользователя

Страница: 53 / 521

First steps | Workpiece setup
Setting a preset
Select the
Manual operation
mode
Press the
TOUCH PROBE
soft key
The control displays the available functions in the
soft-key row.
Set the preset at a workpiece corner, for example
Use the axis direction keys to position the touch
probe near the first touch point on the first
workpiece edge
Select the probing direction via soft key
Press the
NC Start
key
The touch probe moves in the defined direction
until it contacts the workpiece and then
automatically returns to its starting point.
Use the axis direction keys to pre-position the
touch probe near the second touch point on the
first workpiece edge
Press the
NC start
key
The touch probe moves in the defined direction
until it contacts the workpiece and then
automatically returns to its starting point.
Use the axis direction keys to pre-position the
touch probe near the first touch point on the
second workpiece edge
Select the probing direction via soft key
Press the
NC start
key
The touch probe moves in the defined direction
until it contacts the workpiece and then
automatically returns to its starting point.
Use the axis direction keys to pre-position the
touch probe near the second touch point on the
second workpiece edge
Press the
NC start
key
The touch probe moves in the defined direction
until it contacts the workpiece and then
automatically returns to its starting point.
The control then displays the coordinates of the
measured corner point.
Set to 0: Press the
SET PRESET
soft key
Press the
END
soft key to close the menu
Further information on this topic
Presetting
Further information: "Presetting with a 3-D touch probe (option
number 17)", Page 230
2
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
53