HEIDENHAIN TNC 620, Руководство пользователя

Страница: 361 / 521

MOD functions | Setting up touch probes
Soft key Function
Select the SE transceiver
Select the strength of the infrared signal
You only need to change the signal strength if
there is interference.
Select the strength of the radio signal
You only need to change the signal strength if
there is interference.
The
Switching on/off
connection setting is preset based on the
type of touch probe. Under
Deflection
, you can select how the touch
probe is to transmit the signal when probing.
Deflection Meaning
IR Infrared probe signal
Radio Radio probe signal
Radio + IR The control selects the probe signal
You can activate the touch probe per soft key in the “Properties” tab
(e.g., in order to test the radio connection)
If you activate the touch probe’s radio connection
manually per soft key, then the signal remains unchanged
even after a tool change. You must deactivate the radio
connection manually again.
Current radio touch probe data
The control displays the following information in the “Current radio
touch probe data” area:
Display Meaning
NO. Number in the touch probe table
Model Type of touch probe
Status Touch probe active or inactive
Signal
strength
Display of the signal strength in the bar graphic
The control shows the currently best-known
connection as a complete bar
Deflection Stylus deflected or not deflected
Collision Collision or no collision recognized
Battery status Display of the battery quality
If the charge is less than the displayed bar, then
the control outputs a warning.
9
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
361