HEIDENHAIN TNC 620, Руководство пользователя

Страница: 39 / 521

Basic information | Control model, software and features
New cycle functions 81760x-16
Further information:
User's Manual for Programming of Measuring
Cycles for Workpieces and Tools
Cycle
1400 POSITION PROBING
(ISO:
G1400
)
This cycle allows you to probe a single position. You can transfer
the acquired values to the active line of the preset table.
Cycle
1401 CIRCLE PROBING
(ISO:
G1401
)
This cycle allows you to determine the center point of a hole or a
stud. You can transfer the acquired values to the active line of the
preset table.
Cycle
1402 SPHERE PROBING
(ISO:
G1402
)
This cycle allows you to determine the center point of a sphere.
You can transfer the acquired values to the active line of the
preset table.
Cycle
1412 INCLINED EDGE PROBING
(ISO:
G1412
)
This cycle allows you to ascertain a workpiece misalignment by
probing two points on an inclined edge.
Cycle
1493 EXTRUSION PROBING
(ISO:
G1493
)
This cycle allows you to define an extrusion. With an active
extrusion, the control repeats the touch points along a direction
over a defined length.
1
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
39