HEIDENHAIN TNC 620, Руководство пользователя

Страница: 336 / 521

Pallets | Batch Process Manager (option 154)
8
Creating a job list
You can only create a new job list in the file manager.
The file name of a job list must always begin with a letter.
Press the
Programming
key
Press the
PGM MGT
key
The control opens the file manager.
Press the
NEW FILE
soft key
Enter the file name with extension (. p )
Confirm with the
ENT
key
The control opens an empty job list in
Batch
Process Manager
.
Press the
INSERT REMOVE
soft key
Press the
INSERT AFTER
soft key
The control displays the various types on the
right-hand side.
Select the desired type
Pallet
Clamping
Program
The control inserts an empty line in the job list.
The control shows the selected type on the right-
hand side.
Define the entries
Name
: Enter the name directly or select one by
means of the pop-up window, if there is one
Datum table
: Enter the datum directly, where
applicable, or select one by means of the pop-
up window
Preset
: Enter the workpiece preset directly,
where applicable
Locked
: The selected line is excluded from
machining
Machinable
: The selected line is enabled for
machining
Confirm your entries by pressing the
ENT
key.
Repeat the steps if required
Press the
EDIT
soft key
336
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022