HEIDENHAIN TNC 620, Руководство пользователя

Страница: 354 / 521

MOD functions | Changing the machine settings
9
Generating a tool usage file
Refer to your machine manual.
The tool-usage-test function must be enabled by your
machine manufacturer.
Using the
Tool-usage file
MOD function in the
Machine settings
group, you can define whether the control never, once, or always
creates a tool usage file. The settings for the test run and the
program run operating modes must be defined separately.
To change the settings in the tool usage file, proceed as follows:
Select the
Machine settings
group in the MOD menu
Select the
Tool-usage file
function
Select the setting for
Program Run, Full Sequence/Single Block
Select the setting for
Test Run
Press the
APPLY
soft key
Press the
OK
soft key
The control saves the defined settings.
Permitting or restricting external access
Refer to your machine manual.
The machine tool builder can configure the external
access options.
Depending on the machine, you can grant or restrict
access for an external diagnostics or commissioning
software application using the
TNCOPT
soft key.
The
External access
MOD function in the
Machine settings
group
allows you to permit or block access to the control. After blocking
external access, you can no longer connect with the control. In
that case, it is also no longer possible to exchange data through a
network or a serial connection, e.g. with the
TNCremo
software.
To block external access:
Select the
Machine settings
group in the MOD menu
Select the
External access
function
Set the
EXTERNAL ACCESS ON/OFF
soft key to
OFF
Press the
OK
soft key
The control saves the settings.
Once the control is accessed externally, the following icon
appears:
354
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022