HEIDENHAIN TNC 620, Руководство пользователя

Страница: 189 / 521

Setup | Integrated functional safety (FS)
Additional status display
The
FS
tab in the additional status display provides the following
information:
Information on functional safety (
FS
tab)
Soft key Meaning
No direct
selection
possible
A safety-related operating mode is active
FS information:
Field Meaning
Axis
Axes of the active kinematics
State
Active safety function
Stop
Stop reaction
SLS2
Maximum speed or feed-rate
values for
SLS
in the
SOM_2
operating mode
SLS3
Maximum speed or feed-rate
values for
SLS
in the
SOM_3
operating mode
SLS4
Maximum speed or feed-rate
values for
SLS
in the
SOM_4
operating mode
This function must be enabled and
adapted by the machine manufac-
turer.
Vmax_act
Currently valid speed or feed rate
limit
These are either values from the
SLS
settings or from the SPLC
If values are greater than 999 999,
the control displays
MAX
.
The control indicates the test status of the axes by means of an icon:
Icon Meaning
The axis has been tested or does not need to be
tested.
The axis has not been tested, but must be tested
to ensure safe operation.
Further information: "Checking the axis positions",
Page 190
The axis is not monitored by functional safety (FS)
or is not configured as a safe axis.
5
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
189