Gyyr TLC2100-S16, Руководство по эксплуатации

Страница: 43 / 84

33 TLC2100-S16
1837-0700-4852542C
This menu accesses the alarm function submenus.
Alarms
Exit
Alarm Memory
>
Alarm Memory Browse >
Alarm Inputs >
Alarm Sequencing >
Alarm Record Options >
This menu allows the user to view the alarm memory data.
Alarm Memory
A008
Exit
Alarm Event: 1
Alarm input:
02/17/97 Fri
10:32:12 A
Search To Alarm: No
Clear Alarm Memory: No
Parameters:
Total Alarms:
Total of alarms received (up to 255)
Alarm Event: 1 to 255 (read only; Also called Alarm Number).
Alarm Input: Hard
Search To Alarm: Yes, No
Clear Alarm Memory: Yes, No
Notes:
The menu will default to first alarm in memory unless it has been invoked using the
Browse Alarm Memory menu. See the “Alarm Memory Browse Submenu” section of
this manual for more information.
If no alarms are stored then the Alarm Event will display “None“, otherwise it will
display the amount of alarms currently on the Browse Alarm Memory list. See the
“Alarm Memory Browse Submenu” section of this manual for more information.
“Search to Alarm” and “Clear Alarm Memory” cannot both be set to “Yes“.
Scroll to the number of the alarm event you wish to search to in the Alarm Event line.
Enter “Yes” in the Search to Alarm line and then press the PROG. button.
After a “Clear Alarm Memory” is performed, both “Clear Alarm Memory” and
“Search to Alarm” are reset to ‘“No”.
The menu above depicts a typical menu display after 8 alarms have been received.
Alarms Submenu
Alarm Memory
Submenu