Gyyr TLC2100-S16, Руководство по эксплуатации

Страница: 51 / 84

41 TLC2100-S16
1837-0700-4852542C
Switcher
Programming
Submenu
Switcher Programming
Exit
Spot Mode: Auto
Timer Mode
>
Day Rec Sequence >
Night Rec Sequence >
Day Spot Sequence >
Night Spot Sequence >
Camera Titles >
Camera Phasing >
This menu accesses Switcher Programming submenus and set the switching mode
(Spot Mode) for the Spot monitor.
Spot Mode: this function allows the user to manually switch cameras (“Manual“) or
allow automatic switching (“Auto“) for the Spot monitor. In Manual mode, you can
“page” through the cameras using the UP and DOWN buttons. This function may also
be set with a front panel button. Read about the Manual/Auto button in the “Timer
and Miscellaneous Controls” section of this manual for more information.
Timer Mode
Exit
Begin Begin Copy
Day Night All
Mon 08:00a 05:00p No
Tue 08:00a 05:00p
Wed 08:00a 05:00p
Thu 08:00a 05:00p
Fri 08:00a 05:00p
Sat 08:00a 05:00p
Sun 08:00a 05:00p
Available Parameters:
Begin Day/Night:
any time value, AM or PM (“a” or “p“);
12-hour format
Copy All: No or Yes
This menu allows you to program when “day” and “night” begin for switcher
programming purposes.
Set the times you wish Day and Night begin for each day. These will be the times that
the sequences in the Day Sequence menu and the Night Sequence menu will begin. See
the “Day (Night) Sequence Submenu” section of this manual for more information.
If you wish to program all days identically, set Monday's begin parameters and then
set “Copy All” to “Yes” in the Monday line.
If you wish to program each day separately, set “Copy All” parameter to “no” in the
Monday line.
Timer Mode Submenu