Gyyr TLC2100-S16, Руководство по эксплуатации

Страница: 29 / 84

19 TLC2100-S16
1837-0700-4852542C
This menu allows access to the Display Options submenus for the VCR out and Spot
monitors.
Display Options
Exit
Record Display Options
>
Record Text Positions >
Spot Display Options >
Spot Text Positions >
System Code
Enter up to 24 characters in the System Code field. The System Code is displayed with
the on-screen Time/Date stamp. You may enter the digits 0-9, upper and lower case
alphabet letters, a space and a variety of punctuation and graphic characters. Note that
the first 'character' displayed in a character position is always blank space. If you wish
to insert a blank space, push NEXT or PREV immediately after moving to the desired
character position.
To enter a System Code:
• Using the UP or DOWN buttons, move the cursor next to the System code line.
Press the PROG. button.
• A cursor will be displayed.
• Press the UP or DOWN buttons to scroll through the character choices.
• When the desired character is displayed, press the NEXT button to move to the
next character position.
• Repeat this procedure until all desired characters are displayed.
• If you wish to change a character already displayed, press the PREV button until
the desired character will be highlighted. Use the UP or DOWN buttons to select
the new character. Use the PREV or NEXT buttons to move to the next character
position you wish to edit or enter.
• When you have entered all the desired characters, press PROG.
Display Options
Submenu
System Code