53
TLC2100-S16
1837-0700-4852542C
C A + 9
One Shot
C A + :
Field Reverse
C A + ;
Timer Mode Off/On
C A + <
Record Check
C A + =
Counter Reset
C A + !
VCR Status
C A + S
VCR Extended Status
C A + @ Read Time Code
C A + 1
Rewind
C A + 2
Fast Forward
C A + 3
Record
C A + 4
Play
C A + 5
Stop
C A + 6
Field Advance
C A + 7
Still/Pause
C A + 8
Reverse Play
The Operational Control Commands are entered by pressing the Control-A and then
pressing the number or symbol key listed next to the commands below. Important
Note:
Letters are case sensitive for all the commands on the following pages.
E.g., Pressing Control and “A” and then 1 sends a Rewind Command.
VCR Status Return (Ctrl+A+!):
When the recorder receives this command, it will
return the following data:
• Mode of Operation [PLAY, RECORD, F.FWD, REWIND, STOP, F.ADV, R.ADV,
R.PLAY, REVIEW (Rewind/Search), CUE (Fast Forward/Search), STILL, or
Error]
• Tape Speed [02, 18, 24, etc., including 00]
• Tape Counter [00000....99999 ]
• Timer Mode [“T=Off” or “T=On“]
• Alarm Counter [000...099]
• Tape Status [NORM(AL), BEG(IN), END, OUT, LOW]
• WARNINGS [NONE, CYL, MECH1, MECH2, REEL1, REEL2]
• HD [hd = On or hd = Off]
Example response to the VCR Status Command:
RECORD, 240, 1500, T=OFF, 000, NORM, NONE, hd=Off
Explanation:
Unit is in RECORD mode at 240 hour speed; counter reads 1500; the
timer is OFF; no alarms in memory; tape is in normal position; no warnings and tape
is non-HD mode.
VCR Extended Status (Ctrl+A+S)
: when the recorder receives this command, it will
return the following data:
• Tab [Tab=On or Tab=Off] Note: Tab=On means write protected, Tab light is on
• Alarm Index [Index=On or Index=Off]
• Mode Lock [Lock=On or Lock=Off]
• T.End [T.End=On or T.End=Off]
• SVHS [SVHS=On or SVHS=Off]
• Power Loss [PL=On or PL=Off]
• Head [Head=dddddd (dddddd = 000000 to 999999)] Note: “d” represents a
digit
• Total [Total=dddddd (dddddd = 000000 to 999999)]
• Warn [Warn=dd (dd=00 to 99), number of warnings which occurred]
Example response to the VCR Extend Status Command:
T a b = O f f , I n d e x = O f f , L o c k = O f f , T . E n d = O f f , S V H S = O n , P L = O f f , H e a d -
000003,Total=000003,Warn=00
Read Time Code (C A +@)
when the recorder receives this command, it will
return the following data:
• Time, space, Date
For example:
18:58:36 05/015/97
Set 1 - Operational Control
Commands
Set 2 - VCR Extended Status
Commands
Note: See the “Appendix A -
External Interface” section of
t h i s m a n u a l f o r m o r e
information.
Содержание TLC2100-S16
