Gyyr TLC2100-S16, Руководство по эксплуатации

Страница: 71 / 84

61 TLC2100-S16
1837-0700-4852542C
PIN 1 ALARM INPUT
Accepts a contact closure to Ground or TTL level signal. The closure or TTL LOW
level input activates the alarm mode.
PIN 2 ALARM OUTPUT
Output is driven to +12V and can drive 10 mA when the alarm mode is activated.
PIN 3 NC
PIN 4 REC OUT
When the recorder is in any mode except Record mode, the output is 0V. When
in Record mode, the output supplies 10 mA at 12V.
PIN 5 +12 VDC OUT
Capable of supplying 50 mA Max through a 100 mA fuse.
PIN 6 WARNING OUT
Tape transport malfunction. Driven Low when a malfunction occurs, otherwise
+5V. Pulled up to +5V through a 4.7K Ohm resistor.
PIN 7 LOW TAPE OUT
When in Record mode and about 6% of the tape remains before the end of the
video tape, the output becomes active (0V) and can sink 10 mA of current. When
inactive (+5V), it is pulled to +5V through a 4.7K Ohm resistor.
PIN 8 REC CHECK IN
Accepts a contact closure to Ground or TTL level signal. The closure or TTL LOW
level activates the Rec Check mode provided the recorder is in the Record mode.
PIN 9 TIMER OUTPUT
Output follows the levels defined in the Timer menu. See the “7-Day Timer” section
of this manual for additional information. When ON (0V), can sink 10 mA of current.
When OFF (5V), is pulled to 5V through a 4.7K Ohm resistor.
APPENDIX A: EXTERNAL INTERFACE
Detailed
Description of
External Interface:
15-Pin “D”
Connector
IN OUT
AUDIO
1 2 3 4 5
6
7 8
9 10 11 12 13 14 15 16
MP PORT RS-232 REMOTE EXTERNAL FUNCTIONS
SPOT
OUT
VCR
OUT
ALARMS
5V
IN IN
1 2
(Continued on next page)
15-Pin “D”
Connector
8 1
15 9