Gyyr TLC2100-S16, Руководство по эксплуатации

Страница: 48 / 84

38 TLC2100-S16
1837-0700-4852542C
Day (Night) Alarm Sequence
Submenu
1- 1 10S+ 2- 2 10B
Order
Number
Camera
Number
Time (0 - 99)
Time
(Bypass, Seconds, Fields,
Lockout)
Total = 15S 20f
1- 7 10S+ 2- 10 5S+
3- 9 20f+ 4- 4 2L+
5- 5 2L+ 6- 6 2L+
Change the settings of the other, non-relevant cameras to “L“.
Also in the above example, camera 7 is set for 10 seconds, camera 10 for 5 seconds and
camera 9 for 20 fields. The Total will display the total time
Note: this time total, multiplied by the number of the “Scan Count” set in the Alarm
Function Menu, equals the total “Time” value. See the “Day (Night) Alarm Function”
section of this manual for more information.
This menu allows you to set the order of the camera recorded during an alarm. The first
camera recorded during an alarm is set to 1, the second to 2 and so forth. For example,
if you wanted camera 7 to be first, camera 10 second and camera 9 third, those lines
of the menu might look like this:
Day (Night) Alarm Sequence
1
Exit
1- 1
2f+ 2- 2 2f+
3- 3 2f+ 4- 4 2f-
5- 5 2f+ 6- 6 2f+
7- 7 2f- 8- 8 2f+
9- 9 2f+ 10-10 2f+
11-11 2f+ 12-12 2f+
13-13 2f+ 14-14 2f+
15-15 2f+ 16-16 2f+
Total = 0S 28f
Parameters:
Camera Number:
1 - 16
Time: 0 - 99; B (Bypass), S (Seconds), f (Fields), “+” (Video Present)
“-” (Video Loss), L (Lockout)
Total (Sequence Time): in Seconds (S) and Fields (non-programmable)
Notes: This menu sets camera switching sequence in alarm mode
Note: This menu will only be
activated if the Alarm Sequenc-
ing Menu is set to Programmed
(Switching Mode: day/night).
Note: If you set the time to “S”
(that is seconds), this will be
the duration of the sequence
no matter which Record speed
is chosen.
Note: B = camera not present
at Master Reset or non-rel-
evant
L = camera lockout - use this if
you do not wish to include a
camera in a sequence, but
wish to know if video is present
or lost.
+ = camera present at Master
Reset
“-” = camera present at Master
Reset, but subsequently lost.
If an input displays “-“, it can-
not automatically be reset to
“B” - this must be manually set
by user.
Video Present (+)
or Video Loss (-)