Gyyr TLC2100-S16, Руководство по эксплуатации

Страница: 65 / 84

55 TLC2100-S16
1837-0700-4852542C
The Extended Commands are entered by pressing the “Greater Than” (“>”)
key and an alphanumeric key. These commands are also case sensitive.
> A Set/Read Alarm Record Setup
> B Time/Date and Transaction Search
> C Set/Read System Code, up to 24 characters
> D Set/Read Date
> E Read Search Status
> F Read Transaction Data
> G Text Formatting Setup
> H Encoding Option
> I Tape Management Options
> J Read System Jumpers
> K RS Alarm Options
> O Set/Read Camera Switcher Pulse Output
> P Set/Read Timer Program
> T Set/Read Time
> V Read Firmware versions
> tER Tape End Reset (command format is >ter)
Command Syntax:
>D<Month><Day><Year><Weekday>
Parameters:
<Month> = [01....12] *
<Day> = [01....31] *
<Year> = [00....99]
<Weekday> = [1....7] [1 (Sunday), 2 (Monday)....7 (Saturday)]
* Note: you must enter a zero before a single digit for both month and
day. E.g., “3” must be entered as 03.
Entry of the Weekday parameter is optional as it is automatically
calculated by the software.
An error response will occur for illegal dates, such as Feb. 30 or Nov. 31.
Reply
“*” if correct
“?” followed by “*” on next line if incorrect
Command Syntax:
>D
Reply:
<Time><Space><Date><Space><Weekday>
Example:
18:58:36 03/06/96 Sun
Command
Syntax:
>T<Hours><Minutes><Seconds>
Parameters:
<Hours> = [00....23] (24-hour format)
<Minutes> = [00....59]
<Seconds> = [00....59]
Set 5 - Extended Commands
Note: The Extended
Commands may also be used to
enquire about the specific setting
of each command by entering
the command without data.
Set Date Command
Read Date Command
Set Time Command