GSK GSK980TDc, Руководство пользователя

Страница: 354 / 470

GSK980TDc Turning CNC System User Manual
332
Ⅲ
Connection
Bit 3 1: During machine zero return, the deceleration signal of the 4
th
axis (DEC4) and one-rotation
signal (PC4) are connected in parallel (use a proximity switch as a deceleration signal and
zero-point signal at the same time).
0: During machine zero return, the deceleration signal of the 4
th
axis (DEC4) and
one-rotation signal (PC4) are connected separately (use a proximity switch as a
deceleration signal and zero-point signal at the same time).
Bit 2 1: During machine zero return, the deceleration signal of the Y axis (DECY) and one-rotation
signal (PCY) are connected in parallel (use a proximity switch as a deceleration signal and
zero-point signal at the same time).
0: During machine zero return, the deceleration signal of the Y axis (DECY) and one-rotation
signal (PCY) are connected separately (use a proximity switch as a deceleration signal
and zero-point signal at the same time).
Bit 1 1: During machine zero return, the deceleration signal of the Z axis (DECZ) and one-rotation
signal (PCZ) are connected in parallel (use a proximity switch as a deceleration signal and
zero-point signal at the same time).
0: During machine zero return, the deceleration signal of the Z axis (DECZ) and
one-rotation signal (PCZ) are connected separately (use a proximity switch as a
deceleration signal and zero-point signal at the same time).
Bit 0 1: During machine zero return, the deceleration signal of the X axis (DECX) and one-rotation
signal (PCX) are connected in parallel (use a proximity switch as a deceleration signal and
zero-point signal at the same time).
0: During machine zero return, the deceleration signal of the X axis (DECX) and one-rotation
signal (PCX) are connected separately (use a proximity switch as a deceleration signal
and zero-point signal at the same time).
0 1 1
NORF ZNLK
Bit3 1: Manual machine zero return is invalid;
0: Manual machine zero return is valid;
Bit 2: 1: The direction key is self-locked during machine zero return; press the direction key once till
the machine zero return is finished;
0: The direction key is not self-locked during machine zero return; press down the direction key;
0 1 2
APRS ISOT
Bit 7 1: CNC sets the absolute coordinate system automatically after reference point return;
0: CNC does not set absolute coordinate system automatically after reference point return;
Bit 0 1: Manual rapid traverse is valid after system power-on and before machine zero return;
0: Manual rapid traverse is invalid after system power-on and before machine zero return;
0 1 4
ZRS5 ZRS4 ZRSY ZRSZ ZRSX
Bit4, Bit3, Bit2, Bit1, Bit0
1: Machine zero point is set on the 5
th
, 4
th
, Y, Z, X axes; deceleration signal and zero point signal are
needed to be detected during machine zero return;
0: Machine zero point is not set on the 5
th
, 4
th
, Y, Z, X axes; deceleration signal and zero point signal
are not detected during machine zero return;
1 8 3
MZR5 MZR4 MZRY MZRZ MZRX
Bit4/Bit3/Bit2/Bit1/Bit0 1: The direction of machine zero return is negative;
0: The direction of machine zero return is positive;