GSK GSK980TDc, Руководство пользователя

Страница: 200 / 470

GSK980TDc Turning CNC System User Manual
180
Ⅱ
Operation
1) ABSOLUTE POS display interface
The X, Z coordinates displayed are the absolute position of the tool in current workpiece
coordinate system, these coordinates are memorized as power is down and the workpiece coordinate
system is specified by G50.
Basic information in POSITION interface (taking an example of the above figure):
9 G code : information of each G code;
9 M : last executed M code;
9 S :it is input spindle speed when analog spindle is executed, and input spindle’s gear
when the spindle is executed;
9 L : call times of subprogram;
9 F :the first half (0.0000mm/min) is the actual speed, and the second half (200mm/min)
is the command speed;
9 JOG F.( JOG speed): theory speed value of current override in JOG mode;
9 FED OVRI(Feedrate override):override selected by feedrate override switch;
9 RAD OVRI (Rapid override): display currently rapid override;
9 SPI OVRI (Spindle override): display the spindle override when NO.001 Bit1 is set to 1;
9 PART CNT(Part counting) : part counting adds 1 when M30 (M99 in the main program) is
executed;
9 CUT TIME: the system counts the time when the automatic run is started, time unit is hour,
minute and second in order.
The part counting and cut time are memorized at power-down, the clearing ways for them are
shown below:
Method 1
：