GSK GSK980TDc, Руководство пользователя

Страница: 174 / 470

GSK980TDc Turning CNC System User Manual
156
Ⅰ
Progra
mming
Fig. 4-9 Tool nose center on starting point
4.1.3 Compensation value setting
Preset imaginary tool nose number and tool nose radius value for each tool before executing
tool nose radius compensation. Set the tool nose radius compensation value in
OFFSET
window (as
Fig. 4-1), R is tool nose radius compensation value and T is imaginary tool nose number.
Table 4-1 CNC tool nose radius compensation value display window
number X Z R T
000 0.000 0.000 0.000 0
001 0.020 0.030 0.020 2
002 1.020 20.123 0.180 3
… … … … …
032 0.050 0.038 0.300 6
Note: X tool offset value can be specified in diameter or radius, set by No.004 Bit4 ORC, offset value is in
radius when ORC=1 and is in diameter when ORC=0.
In toolsetting, the tool nose is also imaginary tool nose point of Tn (n=0~9) when taking
Tn(n=0~9) as imaginary tool nose. For the same tool, offset value from standard point to tool nose
radius center (imaginary tool nose is T3) is different with that of ones from standard point to imaginary
tool nose(imaginary tool nose is T3) when T0 and T3 tool nose points are selected to toolsetting in
rear tool post coordinate system, taking tool post center as standard point. It is easier to measure
distances from the standard point to the tool nose radius center than from the standard point to the
imaginary tool nose, and so set the tool offset value by measuring distance from the standard point to
the imaginary tool nose(tool nose direction of T3).