GSK GSK980TDc, Руководство пользователя

Страница: 246 / 470

GSK980TDc Turning CNC System User Manual
226
Ⅱ
Operation
Note: When a program is needed to create, the input program name exists, the system opens the file,
otherwise, it automatically create a new one.
Input the edited part program one by one, the character will be displayed on the screen
immediately as it is input(as for compound key, press this key repeatedly for alternate input),
after a block is finished, press or to terminate it.
Note: The unexpected power-off when the program is input, the program being edited cannot be saved.
6.1.3 Searching a character
1. Scanning: To scan the character one by one by cursor
1) Press key to enter the Edit mode, then press key to enter the PRG CONTENT
window;
2 ） Press key, the cursor shifts a row upward; if the number of the column where the
cursor locates is over the total columns of the previous row, the cursor moves to the previous block
end (at “;” sign) after key is pressed;
3
）
Press key, the cursor shifts a row downward; if the number of the column where the
cursor locates is over the total columns of the next row, the cursor moves to the next block end (at “;”
sign) after the key is pressed;
4
）
Press key, the cursor shifts a column to the right; if the cursor locates at the row end,
it moves to the head of the next block;
5
）
Press key, the cursor shifts a column to the left; if the cursor locates at the row head,
it moves to the end of the next block;
6
）
Press key to window upward, the cursor moves to the 1
st
row and 1
st
column of the