GSK GSK980TDc, Руководство пользователя

Страница: 272 / 470

GSK980TDc Turning CNC System User Manual
252
Ⅱ
Operation
to the selected tool offset number according to the input value and the previous recorded
absolute coordinates.
Use the following methods to clear the recorded coordinates when the above methods are used
to execute the toolsetting:
1) In the tool offset page, after the absolute coordinates are input in some tool offset(for
example: Z0 is input in the No.01 tool offset number) and then the axis moves, the recorded
coordinates are cleared;
2) Press
＋
simultaneously, and the recorded coordinates are cleared;
3) Press in the tool offset page and the recorded coordinates are cleared.
7.5 Setting and Altering the Offset Value
Refer to Section 1.3.3 about methods of entering the offset setting page.
7.5.1 Offset setting
1) Press key to enter the offset setting page, select the desired window by pressing the
, ;
2) Move the cursor to the location of the tool offset, wear number to be input.
Scanning: Press , to move the cursor in sequent
Searching: use the following press keys to directly move the cursor to the input position:
Press + offset or and input the offset number in
the pop-up dialogue box, press and the cursor directly positions the target
offset number.
3) After pressing the address key or , the numerical number may be keyed in
(decimal point allowed);
4) Press and the CNC calculates the offset value automatically and displays the result
in the window.
7.5.2 Offset alteration
1) Refer to OPERATION, Section 7.5.1, and move the cursor to the location of the offset
number that is to be altered;
2) If the offset value of X axis is to be altered, key in U; as for that of Z axis, key in W; ；
3) Then key in the incremental value;
4) Press to add the current offset value to the value keyed in, the operation result will be
displayed as a new offset value.
Example: The set X axis offset value is 5.678