GSK GSK980TDc, Руководство пользователя

Страница: 243 / 470

Chapter 6 Program Edit and Management
223
Ⅱ
Operation
CHAPTER 6 PROGRAM EDIT AND MANAGEMENT
In Edit mode, a program can be created, selected, altered, copied and deleted, and the
bidirectional communication of CNC to CNC, or CNC to PC can also be done.
To prevent the program to be altered or deleted accidentally, a program switch is set up for this
GSK980TDc system. And it must be turned on before program editing. Please see details in Section
10.1.1 of the part.
The system provides multi-level user permission to facilitate the management. More than 4 levels
(4 level, 3 level) can open the program switch to edit programs. See OPERATION, Section 10.1.2 .
6.1 Program Creation
6.1.1 Creating a block number
In the program, a block number can be added or not, the program is executed by the sequence.
When the “AUTO SEG” switch in SWITCH SETTING window is OFF, CNC doesn’t generate the block
number automatically, but the blocks may be numbered manually.
When the “AUTO SEG” switch in SWITCH SETTING window is ON, CNC generates the block
number automatically, it automatically generates the next block number by pressing or
in editing. The block number increment is set by the CNC data parameter No.042. (See details in
Section 10.1.1 of this part.)
6.1.2 Inputting a program
Press to enter the Edit mode. Press to enter the Program interface, create a
machining program before inputting a machining program. The creating method is shown below:
Method 1: