GSK GSK980TDc, Руководство пользователя

Страница: 114 / 470

GSK980TDc Turning CNC System User Manual
96
Ⅰ
Progra
mming
Type II ：
The type II is different from the type I as follows:
1
）
Relative definition: more one parameter than the type I .
J ： When J is not input or J is not 1, the system does not execute the run along the roughing
contour; J=1: the system executes the run along the roughing contour.
2 ） The system does not execute the monotonous increasing or the monotonous decreasing
along X external contour, and the workpiece can be up to 10 grooves as follows:
Fig. 3-26-1 （ type
Ⅱ
）
But, the Z external contour must be the monotonous increasing or the monotonous
decreasing, and the following contour cannot be machined:
Fig. 3-26-2
（
type
Ⅱ ）
3
）
The first tool cutting need not the vertical: the machining can be executed when Z is the
monotonous change shape as follows:
Fig. 3-26-3