GSK GSK980TDc, Руководство пользователя

Страница: 54 / 470

GSK980TDc Turning CNC System User Manual
36
Ⅰ
Progra
mming
executing Z axis as follows:
Executing a sole T0101 and tool offsets of two axes are not executed
Executing W0 after T0101, X tool offset is not executed but that of Z is done
When T command and the motion command are in the same block and execute tool offset by
modifying coordinates, the motion command and T command are executed at the same time, the
system executes by adding the current tool offset to coordinates of motion command and whether the
traverse speed is employed the cutting feedrate or the rapid traverse speed defined by the motion
command.
When T command and the motion command are in the same block and execute tool offset by
traversing tool, the motion command or T command is executed separately. Firstly tool change is
executed and then the motion command is executed. The tool offset is executed at current rapid
traverse speed.
The tool offset is cancelled after one of the following operations is executed:
1. Execute
T □□ 00 command;