GSK GSK980TDc, Руководство пользователя

Страница: 288 / 470

GSK980TDc Turning CNC System User Manual
268
Ⅱ
Operation
operation), 6
th
grade(operation limit). The current operation grade is displayed in “Current Level:_” in
the level setting page.
2
nd
grade
：
it is for the machine manufacturer, which permits the machine manufacturer to alter the
state parameters, data parameters, pitch compensation data, tool compensation data, to edit
programs, to transmit PLC and so on.
3
rd
grade: it permits to alter state parameters, data parameters, tool compensation data and to edit
programs.
4
th
grade: it permits to alter tool compensation data (toolsetting operation), macro variables, to edit
programs, but not to alter state parameters, data parameters and pitch compensation data.
5
th
grade: it permits to alter tool compensation data, not to select and edit programs, and not to alter
state programs, data programs and pitch compensation data.
6
th
grade: it has no level to operate only the machine operation panel, not to alter tool compensation
data, not select and edit programs, not to alter state parameters, data parameter and pitch
compensation data.
1) Operation grade entry
a)
Move the cursor to the line “INPUT PASSWORD” in the CNC setting page;
b)
Input the operation password(the system displays one “*” as soon as a number is input;
c)
Press and the operator can enter the corresponding grade operation;
d)
After the operator enters the corresponding operation grade page, the prompt column
prompts the system’s current grade, and the corresponding operations as follows:
Note 1: The defined password length corresponds to the operation grade, and the user cannot increase
or reduce the length at will, which is shown below:
Operation
grade
Length
Initial
password
3
rd
grade 5 digits 12345
4
th
grade 4 digits 1234
5
th
grade 3 digits 123
6
th
grade None None
Note 2: When the operation level is less than or equal to the 3
rd
grade ( 3
rd
, 4
th
, 5
th
or 6
th
grade) and the
system is turned on again, the operation level does not change. When the level is the 2
nd
grade and the
system is turned on again, the operation level defaults to the 3
rd
grade.
2) Password modification
Steps:
a) The operator enters the grade to alter the password according to the method “Operation
grade entry” after the system enters the setting page;
b) Move the cursor to the line “ALATER PASSWORD”;